Bosch GTS1031 Table Saw ReviewFinding the right table saw can be a struggle, especially if you need one that is relatively lightweight and portable.

While there are plenty of high quality options on the market, finding one that is easily transported around jobsites is often the biggest difficulty, mostly because the weight of some units can exceed 100lbs.

Finding a compromise between weight and quality doesn’t mean that you won’t be able to get the right saw for the job, and the Bosch GTS1031 10-Inch table saw is a great example of a unit where weight is kept down, but the features you need are left intact.

This Bosch GTS1031 table saw review will look at the benefits of the , what it can be used for, and whether it would be a good option for your next power tool investment.

Would you rather prefer to skip the review and go straight to the product page on Amazon instead? Click the button below!

 

 

Key Product Features

  • One handed carry design with a tubular frame.
  • Squared rip fence for accurate cuts.
  • Includes basic accessories and storage for them.
  • 4HP Motor.
  • 5000RPM with no load.
  • Compatible with a dado blade.
  • 52lbs tool weight.

Intended Use of the Table Saw

(Back to Top)

The Bosch GTS1031 is a professional grade tool that has been designed for carpenters and other contracting professionals working on construction sites or in renovation and repairs.

With a 10-inch blade capacity and a 4 horsepower motor, this table saw has the power to rip through ply and composite wood materials, as well certain hardwoods, depending on the size and the type of the wood.

Being highly portable it is most suitable for professionals who will be travelling to different jobsites regularly.

Although it could comfortably be used in a home workshop, the nature of the open frame design and lightweight makes it a better choice for those users who demand portability.

 

Frequency of Use

(Back to Top)

Bosch has installed a motor designed for long term use, and there’s no question that this tool would stand up well to both frequent and infrequent use on a job site.

Replaceable parts like the blade would need to be replaced eventually (to maintain performance), however for any kind of realistic construction, decking, flooring, and cabinetry jobs, this unit would be able to perform without problems.

It is not intended for continuous use in a production type environment, and is not advertised as such.


 

How Portable is the Device?

(Back to Top)

Portability is one of the Bosch GTS1031 biggest assets.

Bosch has created a design that minimizes weight, without sacrificing on strength or practicality.

The tubular frame is made from steel for added strength, and the lack of a complete shroud around the base helps to reduce the weight that you might expect from a saw of this quality.

In total, the table saw weighs only 52lbs, which makes it easy to load on a truck, trailer, or van, and it can easily be carried around jobsites.

Bosch has done well to balance the table so that one handed carrying is practical for most users.

 

What are the Power Source Requirements?

(Back to Top)

The table saw is rated at 15 AMP which means that it will need to be run from a mains power outlet that meets or exceeds this rating.

An extension cable can be used, and will be necessary in most situations.

It should be ensured that the cable is a high quality 14-gauge electric cable. Cables should not exceed 25 feet for optimal and safe operation of the power tool.

 

What is the Performance Rating of the Bosch GTS1031?

(Back to Top)

bosch gts1031 using a push stick

bosch gts1031 using a push stick

With a four horsepower motor and a blade that operates up to 5000 RPM, there’s no questioning that this tool has been designed for professional level performance.

Performance is also determined by the type of blade that is used in the device, and this is an important consideration that needs to be made by new owners.

Included in the package is a quality general purpose carbide tipped blade, which can be upgraded depending on your needs.

 

What is the Rip Capacity?

(Back to Top)

Rip capacity is a key feature of any table saw, and aside from accuracy of cuts, is one of the most important features that potential owners should consider.

Ripping capacity using the table and rip fence is 18 inches to the right of the saw, and 7-3/4 to the left.

Table saws don’t technically limit the size of the material being ripped, and if owners want to use materials that exceed the maximum extended length, they should ensure that adequate support is provided for the material.

Cut depths are rated at 2-1/4” at 45 degree angles, and 3-1/8” at 90 degrees. Capacity for dado blades is limited to 1/2”.

 

How Good is the Rip Fence?

(Back to Top)

The rip fence is an integral part of any table saw, especially considering that it is one of the single most important features of the tool that will allow for accurate and square cuts.

The fence used on the GTS1031 is familiar to other saws in the Bosch range, including the Bosch 4100. It is made from aluminum with plastic ends where it squares with the table.

The rip fence quality is high, but it’s not the best fence that you will find on a table saw.

It suffers from similar problems to the one used on the 4100 model, which is to say that the plastic ends don’t include rollers, which means that there can be some jarring movement when relocating the fence.

Overall, the quality is adequate and usable, although it wouldn’t be considered a standout feature of the product.

 

How Does the GTS1031 Perform with Dust Collection?

(Back to Top)

Because there is no shroud around the base of the table, dust buildup is not an issue with this model. There is a single dust ejector port on the rear of the unit, opposing the operator position.

This port could be connected to a powered dust collection system in a shop, or it could be hooked up to a Bosch (or any generic) dust collection bag.

The portable and open design of the unit definitely helps with dust problems, which have been reported on similar tools that use plastic shrouds around the base.

 

What Safety Features Are Incorporated into the Design?

(Back to Top)

Bosch is a world leader in power tools, and they are heavily invested in making their tools safe for both professional and home users.

Before purchasing and using any table saw, it is important to respect the fact that saws can be dangerous when used incorrectly or outside of the manufacturer specifications.

Inexperienced users should read all safety and operational guidelines found within the user manual, and apprentices or students should only use the tool under supervision.

To ensure safe operation, Bosch uses design features like the plastic modular blade guard system, kickback pawls that prevent accidents, and a riving knife and push stick are part of the package.

 

Does the Unit Require Any Maintenance?

(Back to Top)

Maintenance requirements are low, and again, the open design of the unit helps to eliminate many of the cleaning troubles that can exist with other devices.

Lubrication is a must, and all moving parts should be regularly checked for lubricant and any signs of wear.

 

Is it Easy to Use?

(Back to Top)

bosch gts1031 setup

bosch gts1031 setup

Ease of use is relative to the operator, but part of what makes the Bosch GTS1031 10-Inch Portable Jobsite Table Saw so easy to use is the fact that it can easily be transported, plugged in, and made ready to operate.

Bosch has designed the arbor in a way that the blade sits accurately, even after transportation, so there is little user adjustment needed to get the most from this saw.

Angle is easy to adjust with a large plastic hand crank, and incremental labelling is bold and made for high visibility.

The locks used for extending the table are also easy to use, and are bright red, allowing users to easily see their position.

Overall, any experienced contractor will find the GTS1031 both intuitive and familiar, and the basic functions of a table saw will be relatively easy to grasp for newcomers.

 

How is the Quality of Construction?

(Back to Top)

Bosch is known for quality, and this table saw is an excellent example of how they got their reputation.

The use of steel for the base is an excellent choice, as it adds rigidity, stability, and helps give longevity to the unit. The table surface is aluminum, which provides good support without adding too much weight to the unit.

As can be expected for a tool in this price range, some of the components are made from hardened plastic.

This reduces weight but it also means that these parts will potential fail after extended periods of use.

While the use of plastic could be considered a negative, it’s a necessary compromise to keep the cost and weight down, and doesn’t affect functionality of the device.

 

Are Accessories Included in the Box?

(Back to Top)

Basic accessories are included in the package, providing everything that is needed to start using the unit.

  • 10-inch carbide tipped blade.
  • Miter gauge.
  • Rip fence.
  • Push stick.
  • Included tool wrenches for changing the blade.

 

Is the Documentation of High Standard?

(Back to Top)

Bosch provides their typical high quality user guide and safety manual, which is also available for download on their official website here.

 

Pros

(Back to Top)

  • One of the most portable table saws in its class.
  • Can be carried with one hand.
  • Side stackable for easy transport or storage.
  • The design allows for perfect setup out of the box, with a perfectly squared miter gauge / blade.
  • Compatibility with a dado blade adds versatility.
  • Storage clips underneath the unit for transporting the included accessories.

Cons

(Back to Top)

  • Use of plastic can limit the lifetime of the tool.
  • Noise may be a problem for some users, with volume at around 96dB while idle.
  • A bad arbor bearing can cause unnecessary play that results in rough cuts and vibration. This has been reported by a small percentage of customers, and is covered under the Bosch warranty.

 

Tips for New Owners

(Back to Top)

New owners will find this an excellent package if they need a tool that is, essentially, ready to go straight from the box. One major consideration would be replacing the included blade for a higher quality specialized or general purpose blade.

 

What do Consumers Say About the Product?

(Back to Top)

Consumer reviews are overwhelmingly positive, with an average 4/5 stars from almost 200 reviews (on the leading online reseller).

 

How Much Does it Cost?

(Back to Top)

Prices can fluctuate depending on sales and sellers, with the 2016 price for a new unit being in the range of $300 to $400 with free shipping. The best prices for the Bosch GTS1031 10-Inch Portable Jobsite Table Saw are found at online retailers.

Check below for the latest price and offers on Amazon.

 

Recommended Accessories for Owners

(Back to Top)

The basic accessories included in the package allow safe cutting out of the box, but there are additional items that can be purchased to add convenience.

 

Shipping & Packing

(Back to Top)

As is (unfortunately) common with larger tools and packages, there have been some consumer reports of damaged packaging.

The Styrofoam support and strong cardboard used in the packaging will prevent damage in most cases. New owners should inspect the package, alignment, and operation on first use, and contact Bosch with any concerns regarding the unit.

 

Does Bosch Provide Good After Sales Support?

(Back to Top)

Bosch provides excellent phone support and is even active on review communities online. They can be contacted on 1-877-BOSCH99 (1-877-267-2499).

 

Detailed Specifications

(Back to Top)

  • Amperage 0
  • Arbor 5/8″
  • Arbor Size 5/8″
  • Bevel Angle Range -2° to 47°
  • Blade Diameter 0
  • Dado Capacity 1/2″
  • Depth of Cut at 45 Deg. 2-1/4″
  • Depth of Cut at 90 Deg. 3-1/8″
  • Length 75″
  • No Load RPM 5,000
  • Rating 120 V
  • Ripping Capacity-Left 7-3/4″
  • Ripping Capacity-Right 18″
  • Table Top Dimensions 5” W x 20” D
  • Voltage 120V
  • Weight 0lb

Where is the Bosch GTS1031 Table Saw Made?

(Back to Top)

The unit originates from Taiwan.

 

Product Dimensions

(Back to Top)

Dimensions        22.5″ x 22.5″ x 13″

 

Warranty

(Back to Top)

The unit is covered by Bosch’s standard one-year warranty for materials and craftsmanship.

 

Notes on Fine Tuning

(Back to Top)

bosch gts1031 setting the blade angle

bosch gts1031 setting the blade angle

The unit shouldn’t require fine tuning out of the box (thanks to the arbor design), but if the blade is slightly out of alignment, owners can follow the instructions of page 18 of the user manual.

These include;

  • Marking the blade tip at the far end and using a combination square to measure the distance to the miter slot.
  • Rotating the blade and making another measurement when the mark reappears on the opposing side of the slot.
  • If unaligned, loosen the alignment bolts under the unit, adjust the blade until parallel, and retighten the bolts. (The bolt tool is included in the package).

Our Bosch GTS1031 Review: Final Thoughts

(Back to Top)

In this Bosch GTS1031 10-Inch Portable Jobsite Table Saw review we have found the unit to be solidly built, dependable, and extremely portable.

There are few devices with comparable quality that are as portable as this, and that’s enough to make it worth recommending to any professional who needs a lightweight but capable saw.