Bosch GTS1031 vs DeWALT DWE7480The Bosch GTS1031 and the DeWALT DWE7480 are two very reasonably priced table saws aimed at the professional jobsite table saw market.

If you’re wondering which one is the best option for your money, then a direct comparison is in order.

We’ve reviewed both these table saws in-depth in our comprehensive review section, and now it’s time to take a look at both of them in terms of portability, features, quality, and some other key areas.

Is there a clear winner their Bosch GTS1031 vs DeWALT DWE7480 comparison?

Bosch GTS1031 vs DeWALT DWE7480-Key Product Feature Comparison

    • Both saws feature high RPM motors, with the DeWALT at 4800 RPM, and the Bosch at 5000 RPM.
    • Both tools are rated at 15 AMP.
    • Both are assembled in Taiwan.
    • The Bosch supports a ½” Dado blade.
    • Both use 10 inch blades.

What is the Intended Market for These Table Saws?

Both saws have been designed for professional applications, such as home renovation or repairs, general construction work, flooring, trim work, deck building, and general carpentry.

Because they’re designed for portability, the travelling contractor should be considered as the ideal target market.

Continuous Use

Although neither saw has been designed to run continuously for hours, they will both live up to worksite use. This means intermittent periods of activity throughout a work day.

New owners should be aware that continued performance will be highly reliant on a stable power source and a good blade.

Portability Comparison

Weight on both devices is quite low, with the Bosch weighing 52 lb., and the DeWALT slightly below at 45 lb.

Although the DeWALT has a slight edge, 7 lb. should not make any noticeable difference to most professionals.

Either saw can be easily carried around by the frame, and will be manageable by most professionals experienced with power tools.


What are the Power Source Requirements for These Saws?

Both saws are rated at 15 AMP and will require a 20 AMP mains outlet to operate.

Extension cords can be used, providing that they meet certain requirements. 25ft cables should be made of AWG 14-gauge wire, and 50ft cables should use AWG 12-gauge.

Anything in excess of 50ft is not recommended by either manufacturer.

Performance – Comparing the Bosch and DeWALT

So far, both tools are on par, so let’s take a look at performance to see if there’s any significant difference. Both electric motors provide a good amount of torque and high rotational speeds.

Testing for both saws has revealed positive performance with both hard and soft wood, providing that a good multi-toothed blade is used.

Cut depth between the two is identical, which is 2-1/4 inches at 45 degrees, and 3-1/8 inches at 90 degrees.

Rip Capacity

Now that we get to rip capacity, there is a definite difference between the two.

The Bosch GTS1031 falls slightly behind with a left blade capacity of 7-3/4 inches, and right of the blade goes to a maximum of 18 inches.

This is respectable for this class of power tool, but the DeWALT has a significant advantage. The DWE7480 can cut 12 inches to the left of the blade, and 24 inches to the right up to the end of the rip fence.

Rip Fence

The rip fence on the DWE7480 is a superior rack and pinion design that allows for easy adjustment and accurate movement.

The Bosch GTS1031  uses a basic style sliding fence that is manually pushed along the table surface. Anybody who has used the Bosch style fence will be familiar with the jarring movements that are common when adjusting, and this can cause the fence to fall out of alignment.

DeWALT is a definite winner in this category.

Dust Collection

Both saws have high quality dust collection systems that are ready to be connected to collection bags or vacuum systems.

They both perform equally well, and eliminate dust buildup issues that are common with open saw designs.

Safety Features

Safety features are identical and meet what is basically an industry standard at this time.

The saws feature clear blade guards for easy sighting and safety, and they include kickback pawls to prevent jobsite accidents. Both tables come with push sticks for safe use of smaller pieces of material.

Maintenance

One of the best things about electronic tools is that the motors are maintenance free. Both units feature sealed motors that are permanently lubricated.

The only necessary maintenance is ensuring that excess dust on or under the table is removed, and lubricating any exposed moving parts like adjustment mechanisms.

Ease of Use

Virtually any professional grade table saw will be simple to use for experienced contractors or home carpenters.

Bold labelling and logical design means that both tables are on par when it comes to ease of use.

Is There a Difference in Construction Quality?

Again, as we look at both saws, we find construction that is essentially on par. On both saws, the metal used, and the fit and finish is of the highest quality.

Both Bosch and DeWALT are well known and trusted brands, so there should be no surprise that they are able to deliver when it comes to overall construction. However, neither unit is perfect, and they both have let downs in the same area.

The plastic parts on the tools are hardened, but won’t last as long as metal parts (or even the wooden parts that were common on tools of yesteryear).

Both units use low end miter gauges which are more befitting of cheaper saws, and the included blades are of average quality. There are upgrades that could be made on both, but for the price of the overall package these areas can be mostly overlooked.

Do These Saws Include Accessories?

Standard accessories for both include the push stick, safety pawls, blade guard, miter gauge, rip fence, and miscellaneous adjustment tools.

Documentation

Excellent user manuals are included for both tools, as could be expected from two top brands.

Pros and Cons

Pros include;

  • Both saws are highly portable and can be carried one-handed by their frames. They can both be stacked on their sides.
  • The Bosch is compatible with a small Dado blade (1/2 inch).
  • The DeWALT has a good rip capacity for the price point and an excellent rip fence.
  • Both feature good overall construction.

Some of the cons are;

  • Low quality miter gauge and some plastic components.
  • Low quality rip fence on the Bosch.
  • The DeWALT doesn’t support a Dado blade of any size.

 

Warranty

Both brands offer good after sales support, and the Bosch table saw comes with a one-year warranty.

DeWALT has a better warranty which covers three years, with one year of free maintenance offered for limited scenarios. DeWALT definitely comes out on top in terms of after sales support.

Origin

As mentioned earlier, both units originate from Taiwan.

What Do The Consumers Say?

The DWE7480 from DeWALT gets a 4.5/5 rating on the largest ecommerce website, while the Bosch GTS1-31 has a slightly lower 4.1/5 rating.

Both can be considered positive and reinforce the fact that these are high quality tools, designed for demanding users.

Does Price Make a Difference?

Both units are priced in the $300 to $400 range, with the Dewalt being a little more on the expensive side.

Check below for their latest prices and offers.

 

Bosch GTS1031 vs DeWALT DWE7480: Our Final Thoughts

Here we have two tools that are virtually neck and neck in most areas. If we look at price alone, then the Bosch is a better deal.

However, if we think about things like the rip fence, total rip capacity, and even the warranty, then the DeWALT scores more points.

Even with the fact that the Bosch can handle a small Dado blade, the DeWALT is still the winner from a technical and performance standpoint.

For a small increase in price, the DeWALT offers better rip capacity, an accurate rack and pinon rip fence, and a three-year warranty that is one of the best in the industry. For those reasons, it’s represents higher overall value and performance.

If the stretch in price can be made, then go for the DeWALT. If the budget is more important and $379 is simply too high, then the Bosch can offer near-equal performance with just a few compromises.