At Power Tools Ninja we’re all about giving you up front information about the portable air compressors on the market, and what you need to know to find the right one.
Even so, you might make your way through all of our detailed air compressor reviews and still be left a few similarly spec’d air compressors. You may find two units that appear quite similar at a glance. One question you might ask is: Senco PC1010 vs Rolair JC10, which one is right for me?
Both units are small and lightweight, they feature similarly sized storage tanks, and their maximum PSI ratings are also comparable. However there is a difference in price, with the Rolair tipping the scales.
Does that mean it’s a better unit? And more importantly, is it the right one for you? Check out our comparison to find out.
Senco PC1010 vs Rolair JC10 – Unit Overview
|Senco PC1010||Rolair JC10|
|• 0.6 CFM @ 90 PSI|
• 125 PSI Max
• Partial Roll Cage
• 20 lbs.
• 1 Gallon Tank
• 0.5 hp Motor
• $100-$200 Price Range
|• 2.35 CFM @ 90 PSI|
• 115 PSI Max
• Built within a Roll Cage
• 39 lbs.
• 2.3 Gallon Tank
• 1hp Motor
• $200-$300 Price Range
Which Compressor is More Portable?
Both of these compressors were designed for portability, and they’re both relatively lightweight with easy-carry handles. It is important to note that even though the Rolair JC10 is almost twice the weight of the Senco, 20lbs. is not a huge difference in the real world. The average user won’t have trouble carrying either of these compressors around.
When it comes to footprint, the Senco does have a slight advantage. At 14×10.3×12.5 inches, it is marginally smaller than the Rolair, which is 14x15x15 inches. This is to be expected considering that the Rolair has a tank with more than twice the capacity of the Senco.
As far as portability goes, neither unit will cause trouble when it comes to moving them around, and storage requires minimal space.
Is there a Clear Winner with Design and Features?
The Rolair JC10 has an obvious advantage when it comes to design. The full roll cage means that the compressor is well protected from bumps, tipping, and drops. The Senco is left relatively exposed as the half roll cage barely covers the motor and gauges.
Construction wise, both compressors are built to a high standard, but not to the level of detail or quality that you would find on units from manufacturers like Makita and DeWalt.
Unfortunately, the Rolair does suffer from some quality control issues, which we will talk about further down the page.
The Senco and Rolair both feature single ¼ inch connectors for your air tools, which is the industry standard connection at this time.
Both compressors are also oil-free units, so they require little maintenance outside of cleaning and draining of the air tanks after use.
Which Compressor Performs Better
For many consumers, performance is more important than price, and this may be what the team at Rolair were betting on with their JC10.
On paper, the advantage to the Rolair is obvious. 2.35 CFM @ 90 PSI is almost four times that what the Senco can produce. What does this mean in the real world? It means that if you’re going to be using tools that require more air, then the Rolair is the way to go.
The Senco performs best with small nailers and staplers, and for light inflation tasks. Air cleaning is also possible, but the tank will deplete quickly.
Airbrushing can be performed but it would be for short periods only. For example, there’s no way you could paint a whole car with the PC1010, although that’s not what the JC10 is designed for either.
The JC10 does everything that the Senco does, with the differences being that it can run for longer without recharge cycles, and it has the CFM to move some heavier nails.
Always check you air tool requirements, because the 0.6 @ 90 PSI that you can get from the Senco will limit your applications. Find out more about CFM with our CFM Guide for Air Compressors.
The Rolair is the definite winner here if you want to use some slightly heavier tools, although it is still a trim compressor at heart. Both compressors have relatively fast recharge times, but they don’t have continuous duty cycles.
The Senco should be rested for 20 minutes out of every hour of continuous use, and the Rolair is exactly the same. Worth noting though, is that with a larger tank, you may find that the Rolair cycles less than the Senco under typical conditions.
Construction and Warranty
The Senco is made in Taiwan, while the Rolair is made in China. Both countries have factories capable of producing hard working and long lasting tools, so long as design, materials, and quality control is of a high standard.
Although the Rolair costs more, the Senco seems to be put together better. Some Rolair units have had troubles with irregular seams and poor quality components. Because the Senco is so much cheaper, you actually get better quality for the money paid.
Both units come with a 12-month warranty, which is standard for consumer grade air compressors.
With so many air compressors on the market, it can be hard to make a final decision. Thankfully, that’s what we’re here for.
If you need a lightweight compressor for lightweight tasks, the Senco PC1010 is an easy choice. There are sacrifices when it comes to tank size, CFM output, and design, but there’s no doubting that this is an excellent compressor for the price.
The main problem is that the application of the Senco is limited. If you plan on using heavier tools in the future, you would need to upgrade compressors, so that is a consideration that you need to make before purchasing.
The Rolair JC10 comes with a heftier price tag than the Senco, so there is a level of expectation that it needs to be twice as good.
On paper it is, but in reality there are still sacrifices with this unit.
Higher CFM and a larger tank mean that you can use bigger tools, and you can use them for longer. It’s still not a heavy duty air compressor, but it is easily more capable than the Senco.
The full roll cage is a massive benefit, but the sometimes poor quality control and lower grade components used do not reflect the price point. It’s in no way a bad purchasing decision, but you will have to decide if you need the extra output, or if the slightly smaller and less powerful Senco makes more sense to you economically.
If you’re planning to do some serious nailing and stapling, you will find a huge benefit in the power and larger tank found in the Rolair.
Remember that purchasing a compressor is not all about power. Both of these units have their advantages and disadvantages, so the trick is to find the sweet spot that meets your needs.
If you still don’t find either compressor to be within your ideal window, don’t forget to check out all of our detailed Air Compressor Reviews for advice on all the major brands.