DeWalt is one of the leading manufacturers of portable electronic power tools for professionals and DIYers. Among their line-up of tools is the DeWalt 10" Table Saw, model number DWE7491RS, which is a very popular saw and a favorite among contractors.
If you're in the market for a 10" table saw, then you should definitely take a look at the DWE7491RS. This review will give you the information you need to determine if it's the right saw for you.
Since 1922, DeWalt has produced high-quality, trustworthy power tools, as well as many other types of gear for professionals and DIYers. Twenty-nine years after introducing its first-ever line of portable electric power tools, the DeWalt 10" DWE7401RS is another illustration of the talent, passion, and rich history the company brings to their products.
- Amps: 15 Amps
- Arbor Size: 5/8"
- Blade Diameter: 10"
- Depth of Cut @ 45°: 2-1/4"
- Depth of Cut @ 90°: 3-1/8"
- Max Rip to Left of Blade: 22"
- Max Rip to Right of Blade: 32-1/2"
- Max Width of Dado: 13/16"
- No Load Speed: 4800 RPM
- Weight: 90-pounds
- Rack and Pinion System
- Accepts 13/16" Dado Blades
- Power Loss Reset
- Miter Gauge
- Blade Guard System
- Dual Dust Collection
- Stand Included
Watch the Video
The DeWalt DWE7491RS 10" Table Saw is a consumer favorite which has earned the nickname, "the king of the table saws," and it is arguably DeWalt's best selling table saw.
Dual Dust Collection Ports - There's a lower port with a 2-1/2 inch outlet, and an upper port located on the blade guard. It has a 1-1/2 inch outlet.
Rack & Pinion System - DeWalt's telescoping rack & pinion system is one of the most stable and reliable fences on the market. It's design allows for accurate adjustments, and the saw can handle cutting up to 32-1/2 inches to the right of the blade, and 22 inches to the left.
Dado Blade - If you need to use a dado blade, the DWE7491RS accepts a 13/16-inch dado blade. Unfortunately, the saw doesn't come with a dado plate.
Accessories - The saw comes with a full range of accessories that you'd expect to see. It has a miter gauge, push stick, and all the wrenches required. The power cord has a built-in wrap and all the accessories can be stored under the table.
Rolling Stand - DeWalt includes a rolling stand with their 10-inch DWE7491RS table saw. It's easy to set up and break down, and provides a sturdy work support surface. It also makes hauling the 90 lbs table saw easy.
Each year there's thousands of serious injuries that occur with the use of table saws. The exposed blade that operates at a high-speed can be extremely dangerous and DeWalt uses their exclusive Site-Pro Modular Guarding System which allows the user to make tool-free adjustments to the guarding components.
Blade Guard - The blade guard assembly covers the blade to prevent an accidental slip when you're feeding the wood through. It is made of clear plastic and can be locked in the raised position when you're adjusting the height of the blade or other similar tasks.
Riving Knife - DeWalt installed a shark fin-style riving knife behind the blade to help prevent kickbacks. What we really like about this design is that it rises up and down with the blade.
Flip Over Fence Option - The fence easily flips over to rip narrow workpieces without the need to remove the blade guard.
Power Button Flip Cover - DeWalt has added an additional layer of safety to the table saw's power button. The flip cover design ensures you won't be able to accidentally start the blade rotation. Plus, it's very easy to turn off whether during normal operation or in case of an emergency.
Power Loss Reset - If the power is interrupted, the saw will automatically reset to off. Once the power is restored, the saw will NOT automatically start, you'll need to physically press the power switch to power it on again.
Performing proper and regular maintenance on your DeWalt 10" Table Saw is essential to helping it run at peak performance and maximize its service life.
But before performing any maintenance or repairs, make sure that the table saw is disconnected from the power source, and you're wearing safety glasses.
Remove chips and wood dust from the motor's housing with compressed air. This should be done frequently to prevent accumulation, which could cause an electrical shock when using your table saw.
The plastic parts can be wiped down with a damp cloth, but never use any cleaning solvents as they may damage the plastic.
When repairing or maintaining your table saw, never use: Gasoline, turpentine, lacquer or paint thinner, or any other household cleaning product.
Any repairs, adjustments, or maintenance should be performed by a qualified DeWalt Service Center. Registering your new table saw will allow DeWalt to keep in touch with you regarding safety issues, as well as taking advantage of warranty work.
DeWalt makes registering easy by filling out a quick form on their website. They offer a three-year limited warranty, and will repair any defects which are clearly attributed to manufacturing faults free of charge.
In addition, DeWalt offers one-year of free service to repair normal wear and tear on your table saw, which is a great opportunity to get your saw tuned up after the first year of use!
DeWalt is a trusted brand among professionals and DIYers. This 10-inch table saw is designed to handle large projects onsite, which makes it a favorite for contractors.
The incredibly smooth and precise Rack & Pinion system will deliver the perfect cut every time, and the combination of the sturdy table and 32-1/2 inch rip capacity makes this an unbeatable table for those who demand quality equipment capable of tackling the most challenging of work.
The DeWalt DWE7491RS delivers 3 1/8-inch cuts at 90°, and 2 1/4-inch cuts at 45°, and it has one of the largest rip capacities of any portable table saw on the market!
DeWalt Comparison: 10" Table Saw vs. 8-1/4" Table Saw
DeWalt Model #
10-inch Table Saw
8-1/4 inch Table Saw
31" L x 24.5" W x 31" H
22.75" L x 22.75" W x 13" H
32-1/2 inch Rip Capacity
24-1/2 inch Rip Capacity
15 AMP / 4800 RPM
15 AMP / 5800 RPM
The DeWalt DWE7491RS 10" Table Saw is one of the best table saws on the market. With its large rip capacity, table size, and 10" carbide blade with a 2-1/4 to 3-1/8" cutting depth, this saw can effortlessly handle nearly any workpiece you need to cut.
There are less expensive table saws on the market, and if you don't need such a large saw, you could take a look at DeWalt's 8-1/4" Table Saw which is significantly less expensive. Read our full review here.
However, the sturdy, easy to use stand with wheels on the DWE7491RS adds a portability that's difficult to match. If you're looking for a 10" table saw, we highly recommend this one. It's simple-to-use design and straightforward operation make this table saw hard to beat.
- Large table: 21-7/8" x 26-3/8"
- 32-1/2" rip capacity
- Portable and light enough to move from job site to job site
- Smooth, accurate, Rack & Pinion telescoping system
- Sturdy, easy-to-use stand with wheels
- A bit on the pricey side
- The miter gauge is a bit wobbly
[amazon box="B07BZVKF8M,B08F9RFJ2K,B086YHDYPW" grid="3"]