• Home
  • |
  • Blog
  • |
  • Best Air Compressor for Spraying Texture: Our Top 3 Picks

Best Air Compressor for Spraying Texture: Our Top 3 Picks

‚ÄčAs an Amazon Associate we earn from qualifying purchases. Learn More.

If you've ever textured a wall or ceiling, you know that using the right air compressor is critical. But finding the best air compressor for spraying texture may not be as easy as hooking up the one in your garage. You'll need to use the lowest PSI setting possible in order to properly spray the texturing material, yet still be able to move the material through the sprayer.

Unfortunately, not every texturing material uses the same air pressure. Some will spray just fine at one PSI setting, while another, heavier bodied material may require a higher PSI. An air compressor that's capable of delivering both a lower and higher PSI is typically your best choice.

Trying to find the best air compressor for spraying texture can be time consuming, and an already delicate job can become even more tedious if you purchase the wrong equipment. To help you find the air compressor that works best for you, we've researched and compiled our top three favorites.  

[amazon table="8177"]


3 Best Air Compressors for Spraying Texture

These are our top three choices when it comes to buying the best air compressor for spraying texture. Each of these compressors will do the job of spraying texture on walls and ceilings, but if we had to pick our favorite, it would be the Makita MAC2400 Big Bore 2.5 hp Air Compressor. Of the three, it has the highest price tag, but even so, it's still quite affordable.


Bostitch CAP1512-OF Air Compressor

The Bostitch CAP1512-OF Air Compressor is lightweight (under 24-lbs) and simple to use. It delivers 2.8 CFM @ 90 PSI, with a maximum PSI of 150. Drawing only 12 amps to run the 2 HP motor won't cause the breakers to trip, and the oil-free pump means there's little maintenance required.

BOSTITCH Air Compressor for Trim, Oil-Free, High-Output, 1.2 Gallon, 120 PSI (CAP1512-OF)

Outfitted with a secure roll cage, the CAP1512-OF is easy to carry and it's protected from damage during transporting from jobsite-to-jobsite. There's also an onboard attachment storage to prevent your attachments and hoses from being misplaced, and the cord wrap is built into the compressor to keep everything neat and tidy.

Considering that the Bostitch CAP1512-OF is not only under 24-pounds, but also quick to recover, we think this is a very good choice. It works as well as many heavier, bulkier air compressors and it's far easier to move from your shop to the work site.


  • The CAP1512-OF is very durable and reliable
  • The engine power allows for quick recovery
  • Maximum PSI is 150
  • Affordable price
  • Very versatile allowing it to be ideal for a variety of tasks


  • With a noise rating of 85.5 dB, this compressor is not the quietest
  • This is a small trim air compressor, so it isn't designed for larger jobs


Makita MAC24000 Big Bore Air Compressor

The Makita MAC24000 Air Compressor has a powerful four-pole motor which can deliver 4.2 CFM of compressed air at 90 PSI. The 4.2-gallon twin stacked tank system is large enough to handle bigger jobs, and the compressor is oil lubricated making it more durable. Although there will be a little more maintenance needed, the motor will be less susceptible to wear and tear.

Makita MAC2400 Big Bore 2.5 HP Air Compressor

Because the Makita MAC24000 draws low amps, you won't need to worry about tripping the breakers. The powerful 2.5 HP motor is suprisingly quite, producing just 79 dB's of noise, which is about the sound of a quiet garbage disposal or blender.

The well-balanced design makes this air compressor easy to operate and transport from one location to another, not to mention, cleaning and maintenance are easy. Makita named this model the "Big Bore" because it has a big bore cylinder of cast iron which allows for quicker recovery times and better performance.

If you're looking for an air compressor that can handle the job of applying texture material (as well as many other tasks), you can't go wrong with the Makita MAC24000. It's definitely a top choice for those searching for the best air compressor for spraying texture - and it can handle a whole lot more! Read our full review HERE.


  • A very durable and reliable air compressor
  • Both powerful and quiet
  • The 4.2-gallon twin tanks allow you to work for longer stretches
  • Makita is one of the top power tool brands


  • Not recommended for outdoor use in the winter. Damage to the compressor may result due to an increased draw of current due to the oil level
  • Weighing-in at 80 pounds, the Makita MAC24000 is not as mobile as many lighter weight systems


California Air Tools CAT-4620AC

The California Air Tools CAT-4620AC has powerful 2.0 HP motor capable of driving a maximum PSI of 125, and 5.30 CFM @ 90 PSI. The Oil-Less Dual Piston Pump System requires less maintenance and can operate for upto 3000 hours before wear. In addition, like so many other air compressors from California Air Tools, the CAT-4620AC falls into the Ultra-Quiet range and generates just 70 dBs of noise.


Engineered with twin 2.3-gallon horizontal tanks, the CAT-4620AC can hold an impressive 4.6-gallons of compressed air. The unit draws 14-amps so you'll want to give it a dedicated branch circuit, and although the manufacturer states that you can use an extention cord, we don't recommend using one on 2 HP compressors. The better option would be to use a longer air hose.

The steel control panel is outfitted with the pressure regulator controls, dual universal 1/4" quick connectors, and two air pressure gauges. This is a great air compressor for spraying texture.


  •  Can run continuously for longer stretches of time
  • Easy starts - even in cold weather
  • Ultra-quiet. Generates only 70 dB of noise
  • Can be used on uneven ground and in cold weather


  • Although still relatively portable, weighing-in at 67-pounds makes it a bit more challenging to move from one place to another

Related Posts