SKIL is a brand that has become synonymous with quality power tools, and with this 10-Inch table saw, the company should be able to maintain their presence in the home workshop and woodworking enthusiast markets.
Designed to be relatively portable and easy to use, the SKIL 3410-02 10-Inch Table Saw with Folding Stand should be able to satisfy the demands of users that have light-to-moderate demands.
Including a stand for easy setup, this product looks like it should have everything to start making quality rips, right out of the box.
Does it stand up to a detailed review? Let’s take a look.
Who Has This Table Saw Been Designed For?
Priced near to the entry level of the table saw market, the SKIL 3410-02 is aimed squarely at home DIY carpenters, professionals who need a lightweight and affordable table saw, and could even be used by young students and apprentices who are beginning to work with power tools.
Quality is around what you could expect for the price, as are the features.
Cutting depth is decent, although the rip length is limited by the table (as we will explore later in the review). For anyone looking for good quality on a low budget, this saw should be a serious contender.
How Frequently Can It Be Used?
Being designed for home DIY and job site cutting, this saw will be able to perform well for short use, or intermittently throughout a work day.
The motor runs at 15 AMP which makes it comparable to other saws in its class, allowing for quality rips as long as there is a good power supply, and high quality blades are being used.
For general woodworking, framing, decking, and other carpentry purposes, frequency of use will not be a problem. However, this saw should not be used in highly demanding construction or production line environments where long term continuous use is necessary.
How Portable is It?
The table itself weighs just over 45 lb., and the entire package with the stand is 67 lb.
Because the saw and stand can be separated, portability is not a major issue. Most adults and professional contractors won’t have trouble carrying the tool between a vehicle and jobsites.
Because it relies on standard 120V power, it should be able to go almost anywhere that it needs to. The included stand features a quick mounting system which makes it easy to separate the unit, helping to increase overall portability.
Are There Special Power Source Requirements?
The SKIL saw is rated for 120 V and draws up to 15 AMP when in use. This means that a 20 AMP outlet should be used, with appropriate extension cables.
For a 15 AMP power tool, cables should not measure anything in excess of 50 feet. For the longest cable, AWG 12-gauge wire is required. 25 foot cables could also be used, and should be made with 14-gauge wire.
As with any high draw power tool, circuits should not be overloaded, and it would be best to run this saw from an isolated circuit.
How Well Does It Perform?
As this is not the largest or most powerful table saw on the market, performance expectations should be kept in the midrange.
It can adequately cut both solid and hard woods when keeping within the depth specifications, however, the included blade will have a big impact on the type of materials that can be cut.
The factory blade can have difficulties cutting through natural wood with any kind of graining, so high quality blades (60 tooth varieties) are recommended for owners who wish to work with stronger materials.
With all considerations aside, the motor provides a good amount of torque, and pairing the right blade with the right materials will allow for quality cuts that will meet expectations.
What is the Cutting (Rip) Capacity?
When using the table as designed, without removing the rip fence and using additional table support, the maximum rip to the right side is 24.25 inches.
Table space to the left of the blade is 12 inches. This offers good rip capacity for a tool in this price range, but it is a limitation that professionals need to be aware of.
Tables that offer higher rip capacities are more expensive, so what you get with the SKIL saw is a compromise between cutting capacity and price.
Is the Rip Fence of High Quality?
The rip fence is made from aluminum and plastic, and is a basic clamping type that fits into recessed grooves on opposing ends of the table.
For basic needs and with good blade alignment, the rip fence will be adequate for most users. However, it’s not the highest quality fence available on tools of this size.
Because of the design, it can be prone to jarring when changing measurements, so owners need to take special care to ensure that it is aligned each time that it is used.
While rack and pinion type fences are becoming more common and do perform better, they are only available on more expensive saws. Again, the fence is something of a compromise, but it’s a minor one that is acceptable and in line with the price point of this saw.
How Does It Perform with Dust Collection?
There’s no dust collection system on this saw, so all dust will be ejected out of the bottom casing of the device.
For home DIY owners this will mean working in a large and well ventilated garage or workshop, or outdoors.
For workers on job sites, this will not be much of a problem, but it does mean that cleanup will be necessary each time. The lack of a dust shroud and ejection port is likely a cost saving decision by SKIL.
What Safety Features Are Included?
Despite being a lower priced unit, all of the expected safety features are present on this SKIL 3410-02 saw. In the package, there is a blade guard, a push stick for safer ripping, anti-kickback pawls, and a riving knife.
These are all standard fare for portable table saws of this type, and it is good to see that despite compromises in other areas, SKIL hasn’t made any sacrifices to operational safety.
Are There Maintenance Requirements?
Electric motors on units of this type are completely sealed, which protects them from dust and other particles. Being permanently lubricated, there is no necessary maintenance for the motor itself. Other exposed moving parts should be greased with standard tool grease.
Dust will be the major concern for owners, and special care should be made to ensure that dust buildup doesn’t compromise the operation of the saw.
Dust can simply be removed by brushing down the components, or an air compressor with an air gun attachment would make quick work of any dust cleaning. The table surface and plastic shroud can be wiped down with a damp cloth when necessary. Blades should always be checked for integrity across all of the teeth.
Is it Easy to Use?
This is a table saw where it can be said that operation is quick and easy. Because of the basic design of the rip fence, it is relatively easy to relocate it and check any measurements against the gauge on the table.
All markings on the table ruler are clear and easy to read, as are markings on the face of the unit. With assistance of the manual, setup is easy, and operation of the tool will be proportionate to the skill of the user. In short, it’s a table saw that does what it needs to do, without any unnecessary features or complications.
However, there is one particular operating downside which links into the construction quality, which we will cover in the next section.
What is the General Construction Quality Like?
The stand included with this table saw is made from steel and is of high quality, and should last for extended use.
The unit itself is made from a combination of metal and plastic, with mixed results.
The plastic body that surrounds the underside of the table is of average quality, and could be prone to cracking if regularly transported between job sites. Plastic is by no means a bad choice of material, but it is not up to the same quality of the plastic shrouds that would be found on more expensive units.
As is (unfortunately) common in table saws, the miter gauge included is of low quality, and the actual miter slot is larger than the gauge itself.
This means that the gauge will move in the slot, which can compromise accuracy of precision cuts. Many current owners would argue that this is common and even forgivable for a saw at this price point, but it’s still something that new owners will need to consider.
Are Accessories Included?
The package includes basic accessories to get started.
- General purpose 10-inch blade.
- Riving knife, safety pawls, blade guard assembly.
- Miter gauge.
- Push stick.
- Quick release stand.
How Good is the Documentation?
SKIL offers a high quality manual in the packaging, which contains detailed information for assembly, troubleshooting, safety, and adjustment of the table saw.
Tips for New Owners
Always check alignment of the blade to ensure there is no collision with the insert. The blade should also be aligned to be parallel to the miter gauge/rip fence. Reading the user manual is a necessity, even for experienced power tool users.
Owners should also be sure to replace the blade almost immediately if they want to work with a variety of hard and soft materials.
What do Consumers Say About the Product?
Consumer reviews are mostly positive, with some mixed reviews. Lack of dust collection is a major complaint, as is the quality of the miter gauge. Despite issues, the unit has a very high star rating on the largest ecommerce website, which is a reflection of its overall quality and low price point.
How Much Does It Cost?
Standard pricing can be in the $200 to $300 range, but there are opportunities online to get competitive pricing.
Recommended Accessories for New Owners
As an entry level table saw, this unit has not been designed with standard modular features that allow for any significant upgrades.
The blade is the most important upgrade, and owners can make a good investment in a dual blade kit, such as t 10-Inch Saw Blade Combo Pack from Dewalt.
Quality of Shipping and Packaging
There has been no negative feedback regarding the quality of the packaging, and free shipping is available for North American customers. New owners should always check the integrity of the package and check all components and accessories are present upon unpacking.
Does SKIL Provide Good After Sales Support?
SKIL phone support is generally good, and owner feedback has found troubleshooting experiences to be positive. The company can be contacted on 1-877-SKIL-999 (1-877-754-5999)
- Amperage 15 AMP
- Bevel Angle 0° – 47°
- Blade Diameter 10”
- Max cut @ 45° 2-1/2”
- Max cut @ 90° 3-1/2”
- Max RPM @ no load 5000
- Weight including stand
Where is the SKIL 3410-02 Made?
This SKIL saw is manufactured in China.
Total dimensions are 28.9 x 20.9 x 13 inches.
The item comes with a one year warranty, which can be upgraded to a three year limited warranty through SKIL.
Fine Tuning Procedure for New Owners
Fine tuning is similar to many portable style table saws.
- Ensure the unit is unpowered, and raise the blade to its maximum height.
- Measure the blade on one side with a combination square, relative to the miter slot. Mark this with a pencil.
- Rotate the blade until the mark emerges from the other side, and measure again. Any discrepancy will indicate misalignment.
- On the underside of the table, locate the four alignment bolts (see user manual for diagram), loosen them, and adjust the blade.
- Check the measurements until the blade is parallel, and retighten the bolts.
Our SKIL 3410-02 Review: Final Thoughts
There are compromises found in this SKIL 3410-02 10-Inch Table Saw with Folding Stand Review, however, they don’t entirely detract from a competitively priced product.
Buyers who aren’t expecting the very best in a table saw, but who instead need an affordable unit that is safe, reliable, and that has good cutting capability, will find that the SKIL table saw meets a number of home DIY and low intensity job site tasks.
If you want to look into in depth reviews of more table saws, then you should check out our comprehensive Table Saw Reviews list.
Or, if you want to learn more about table saw technical features and see some head to head comparisons, then you should check out our Table Saw Buying Advice articles.
SKIL 3410-02 10-Inch Table Saw Summary Review
|IMPORTANT FEATURES||PROS & CONS
|-Electric powered motor|
-Includes basic accessories
-5000 RPM motor with no load
-Cutting up to 3-1/2 inches
-45 lb weight without stand
-Quality steel stand included in the package
-Blade guard and anti-kickback pawls for safety
-Entry level price point
-Good cutting capabilities
-Stand included in the package
-Helpful user manual
-Basic accessories included
-Easy to carry around when separated from the included stand
-No dust collection shroud or port
-Miter gauge doesn’t fit precisely in the gauge slot
-Limited ripping capacity
-Included blade is of low-average quality
-Non-standard miter slots incompatible with high quality replacements
-Rip fence is of a basic design which can make jarring movements during micro adjustments